cl100
Key Spec:
- ESP32S3 and STM32F446RET6 Double controller
ESP32S3 up till 240Mhz double core
STM32F466RET6 up till 180Mhz - Max of 16MBytes SPI flash and 8MBytes SPI RAM for ESP32S3
- 512 Kbytes of Flash memory, 128 Kbytes of SRAM and Max of 4GBytes SD card for STM32F466RET6
- Two 16 GPIOs GPIO expender, total up till 103 GPIOs
- Wi-Fi and BLE support
- 5~30V power input, Max of 3A 3.3V power output
- Low quiescent current
- Easy config Easy sign
| Micro Controller |
|---|
| ESP32-S3-WROOM-1U (ESP32S3N16R8) |
| STM32F466RET6 |
| Storage |
| 16 MiByte SPI Flash From ESP32 |
| 384 KiByte ROM From ESP32 |
| 512 KiByte Flash From STM32 |
| 1 Micro SD Card Port From STM32 |
| Memory |
| 8 MiByte SPI RAM From ESP32 |
| 512 KiByte SRAM From ESP32 |
| 128 KiByte SRAM From ESP32 |
| DC-DC |
| TPS62933DRLR |
| 3.8-30V Input |
| 3A Max 3.3V Output |
| 12μA Static Current |
| 98% Max Duty Ratio |
| IO Expender |
| 2 AW9523B |
| 256 Steps Light Control |
| 400KHz I2C Bus |
| ±4000V ESD Protection |
| 16 GPIOs Per AW9523B Total of 16 GPIOs |
| Connector |
|---|
| 1 USB Type-C Connector with CH340K USB to TTL UART Bridge |
| 1 DC Input Port |
| 1 5.08mm Power Input Port |
| 2 5.08mm Power Output Port |
| 1 Micro SD Card Connector |
| GPIOs For ESP32 |
| 45 GPIOs with IOmux |
| GPIOs For STM32 |
| 50 GPIOs |
| 4 SPI |
| 3 I2S |
| 4 I2C |
| 4 USART |
| 2 UART |
| USB OTG Full Speed |
| USB OTG High Speed |
| 2 CAN |
| SDIO |
| Quad SPI |